Best True Texas Chili Recipes

TRUE TEXAS CHILI

Steps:

• 1. Place the chiles in a straight-sided large skillet over medium-low heat and gently toast the chiles until fragrant, 2 to 3 minutes per side. Don't let them burn or they'll turn bitter. Place the chiles in a bowl and cover them with very hot water and soak until soft, 15 to 45 minutes, turning once or twice.
• 2. Drain the chiles; split them and remove stems and seeds (a brief rinse helps remove seeds, but don't wash away the flesh). Place the chiles in the bowl of a blender and add the cumin, black pepper, 1 tablespoon salt and 1/4 cup water. Purée the mixture, adding more water as needed (and occasionally scraping down the sides of the blender jar), until a smooth, slightly fluid paste forms (you want to eliminate all but the tiniest bits of skin.) Set the chile paste aside.
• 3. Return skillet to medium-high heat and melt 2 tablespoons of the lard. When it begins to smoke, swirl skillet to coat and add half of the beef. Lightly brown on at least two sides, about 3 minutes per side, reducing the heat if the meat threatens to burn. Transfer to a bowl and repeat with 2 more tablespoons of lard and the remaining beef. Reserve.
• 4. Let the skillet cool slightly, and place it over medium-low heat. Melt the remaining 1 tablespoon of lard in the skillet; add the onion and garlic and cook gently for 3 to 4 minutes, stirring occasionally. Add the stock, the remaining 2 cups water and gradually whisk in the masa harina to avoid lumps. Stir in the reserved chile paste, scraping the bottom of the skillet with a spatula to loosen any browned bits. Add the reserved beef (and any juices in the bowl) and bring to a simmer over high heat. Reduce heat to maintain the barest possible simmer (just a few bubbles breaking the surface) and cook, stirring occasionally, until the meat is tender but still somewhat firm and 1 1/2 to 2 cups of thickened but still liquid sauce surrounds the cubes of meat, about 2 hours.
• 5. Stir in the brown sugar and vinegar thoroughly and add more salt to taste; gently simmer 10 minutes more. At this point, it may look like there is excess sauce. Turn off the heat and let the chili stand for at least 30 minutes, during which time the meat will absorb about half of the remaining sauce in the skillet, leaving the meat bathed in a thick, somewhat fluid sauce. Stir in additional broth or water if the mixture seems too dry. If the mixture seems a bit loose and wet, allow it to simmer a bit more (sometimes we like to partially crush the cubes of beef with the back of a spoon to let them absorb more sauce). Adjust the balance of flavors with a bit of additional salt, sugar, or vinegar, if you like.
• 6. Reheat gently and serve in individual bowls with a dollop of sour cream on top and a lime wedge on the side.

TRUE TEXAS CHILI

Steps:

• 1. Place the chiles in a straight-sided large skillet over medium-low heat and gently toast the chiles until fragrant, 2 to 3 minutes per side. Don't let them burn or they'll turn bitter. Place the chiles in a bowl and cover them with very hot water and soak until soft, 15 to 45 minutes, turning once or twice.
• 2. Drain the chiles; split them and remove stems and seeds (a brief rinse helps remove seeds, but don't wash away the flesh). Place the chiles in the bowl of a blender and add the cumin, black pepper, 1 tablespoon salt and 1/4 cup water.
• 3. Purée the mixture, adding more water as needed (and occasionally scraping down the sides of the blender jar), until a smooth, slightly fluid paste forms (you want to eliminate all but the tiniest bits of skin.) Set the chile paste aside
• 4. Return skillet to medium-high heat and melt 2 tablespoons of the lard. When it begins to smoke, swirl skillet to coat and add half of the beef. Lightly brown on at least two sides, about 3 minutes per side, reducing the heat if the meat threatens to burn. Transfer to a bowl and repeat with 2 more tablespoons of lard and the remaining beef. Reserve.
• 5. Let the skillet cool slightly, and place it over medium-low heat. Melt the remaining 1 tablespoon of lard in the skillet; add the onion and garlic and cook gently for 3 to 4 minutes, stirring occasionally. Add the stock, the remaining 2 cups water and gradually whisk in the masa harina to avoid lumps. Stir in the reserved chile paste, scraping the bottom of the skillet with a spatula to loosen any browned bits.
• 6. Add the reserved beef (and any juices in the bowl) and bring to a simmer over high heat. Reduce heat to maintain the barest possible simmer (just a few bubbles breaking the surface) and cook, stirring occasionally, until the meat is tender but still somewhat firm and 1 1/2 to 2 cups of thickened but still liquid sauce surrounds the cubes of meat, about 2 hours.
• 7. Stir in the brown sugar and vinegar thoroughly and add more salt to taste; gently simmer 10 minutes more. At this point, it may look like there is excess sauce. Turn off the heat and let the chili stand for at least 30 minutes, during which time the meat will absorb about half of the remaining sauce in the skillet, leaving the meat bathed in a thick, somewhat fluid sauce.
• 8. Stir in additional broth or water if the mixture seems too dry. If the mixture seems a bit loose and wet, allow it to simmer a bit more (sometimes we like to partially crush the cubes of beef with the back of a spoon to let them absorb more sauce). Adjust the balance of flavors with a bit of additional salt, sugar, or vinegar, if you like.
• 9. Reheat gently and serve in individual bowls with a dollop of sour cream on top and a lime wedge on the side.

TRUE TEXAS CHILI CON CARNE

Steps:

• Heat oil in 6-quart saucepan.
• Add ground beef, onions and garlic and saute until meat is browned.
• Stir in next 7 ingredients and bring to boil over medium-high heat. Reduce heat to medium-low and simmer, uncovered, about 45-55 minutes.
• Taste and season with salt, pepper and cayenne pepper, if desired.
• Ladle into bowls.
• Garnish with cheese, onion and avocado, if desired.

TRUE TEXAS CHILI (CHILI CON CARNE)

Steps:

• HowToSection Prep The Chili Peppers Array
• HowToSection Prepare the Meat: Array
• HowToSection Seasonings: Array

TRUE TEXAS PANDEMONIUM CHILI

Steps:

• Instructions:.
• Brown beef in 2 tsp Wesson Oil, with diced Onions, Annaheim and Serrano peppers. Add beef broth, 2 cups water, 1 can Hunts Tomato Sauce and 1st spices. Bring to boil, cover and cook at medium boil until beef is almost tender (approx 2-1/2 hr). 30 minutes before serving add 2nd spices and 2nd can of Hunts tomato sauce. 20 minutes before serving add 3rd spices. 10 minutes before serving add 4th spices, and 2 squares of chocolate. Adjust to taste for salt and for heat add Tabasco Sauce.

TRUE TEXAS CHILI

Steps:

• 1. Place chilies in a large tall-sided skillet over medium-high heat and gently heat until fragrant, about 2 to 3 minutes per side. Don't let them burn, or they'll turn bitter. Place chilies in a bowl, and cover them with very hot water until soft, about 20 to 30 minutes, turning once or twice.
• 2. Drain the chilies. Split the chilies open and remove stems and seeds. Place chilies in a blender with cumin, pepper, salt and 1/4 cup of the water. Puree the mixture, adding more water as needed, and occasionally scraping the sides of the blender jar, until smooth and forms a paste. Set the paste aside.
• 3. Return the skillet to medium-high heat, and add 2 tablespoons oil. When it begins to smoke lightly, add half of the beef and lightly brown both sides, about 3 minutes per side. Repeat with remaining beef, adding 2 more Tbsp oil to pan. Transfer browned beef to a bowl. Reserve the pan gravy.
• 4. Let the skillet cool to medium-low heat and add remaining 1 Tbsp oil. Add onion and garlic to skillet and gently sauté in hot oil 3 to 4 minutes, stirring occasionally. Add stock and 2 cups water to skillet, then whisk in the masa harina to avoid lumps. Stir in the reserved chili paste, scraping the bottom of the skillet with a spatula to loosen browned bits. Add the beef and reserved pan gravy, and bring mixture to a simmer over high heat. Reduce heat to a barest possible simmer (just a few bubbles breaking the surface) and cook, stirring occasionally, until the beef is tender but still somewhat firm and 1 1/2 to 2 cups thickened sauce surrounds the beef (about 2 hours).
• 5. Stir in the brown sugar, vinegar and more salt (if desired). Gently simmer 10 minutes more. (It might look like there is excess sauce.) Turn off the heat and let the chili stand for at least 30 minutes, during which time the beef will absorb about half of the skillet sauce. If mixture is too dry, stir in additional broth or water, or if sauce is not thick enough then let it simmer a bit more. Taste the sauce and adjust the salt, sugar or vinegar, if you like.
• 6. Serve in individual bowls and garnish with a dollop of sour cream and lime wedge on the side.