Best Sourdough Bread 100 Sourdough Rye Bread Recipes

SOURDOUGH BREAD: 100% SOURDOUGH RYE BREAD

Steps:

• The day before making the dough, make the rye starter. Mix together the barm and rye flour in a bowl, adding only enough water to form a ball. It should be firm and a little tacky but not sticky or spongelike. Work quickly. It is not necessary to develop the gluten, only to hydrate all the flour and form a shaggy but firm dough. Lightly oil a bowl and transfer the starter to the bowl, rolling it around to coat it lightly with the oil. Cover the bowl with plastic wrap.
• Ferment at room temperature for 4 hours or longer, or until the dough doubles in size (it will become softer and stickier as it rises). Refrigerate overnight.
• Also on the day before making the final dough, make the soaker. Combine the coarse rye flour and water in a bowl. Cover the bowl with plastic wrap and let it sit at room temperature overnight.
• The following day, remove the rye starter from the refrigerator 1 hour before making the dough. Cut the starter into about 10 small pieces with a pastry scraper or serrated knife. Mist with spray oil, cover the pieces with a towel or plastic wrap, and let sit for 1 hour to take off the chill.
• To make the final dough, stir together the rye flour, salt, and seeds in a 4-quart mixing bowl (or in the bowl of an electric mixer). Add the soaker and the starter pieces. With a large metal spoon, stir in enough lukewarm water to bring everything together to form a ball (or mix on low speed with the paddle attachment).
• Sprinkle rye flour on the counter and transfer the dough to the counter. Sprinkle the dough with more rye flour and gently knead the dough until all the pieces of starter are assimilated into the dough and the dough forms a very tacky ball (or mix on medium speed with the dough hook). This will take 5 to 6 minutes by hand (4 minutes by machine). Add flour as needed (or small amounts of water if the dough is tight). Let the dough rest on the counter for 5 minutes, and then give it a few more turns to complete the kneading. It should register 77° to 81°F. (This dough will not make a good windowpane when stretched because of the low gluten content.) Lightly oil a large bowl and transfer the dough to the bowl, rolling it around to coat it with oil. Cover the bowl with plastic wrap.
• Ferment for approximately 4 hours, or until the dough nearly doubles in size.
• Sprinkle rye flour on the counter and transfer the dough to the counter, being careful to degas it as little as possible. Divide the dough into 2 equal pieces, sprinkle them with rye flour, and gently shape them into bâtards. Line a sheet pan with baking parchment and sprinkle the parchment with coarse rye flour, semolina flour, or cornmeal. Place the loaves on the pan at least 4 inches apart. Mist the dough with spray oil and cover loosely with plastic wrap.
• Either proof the dough for 2 hours at room temperature or slip the entire pan into a food-grade plastic bag and immediately refrigerate overnight. If you are holding the dough overnight, remove the pan from the refrigerator 4 hours before baking and proof the dough at room temperature, or until about 1 1/2 times its original size. It will have spread sideways as well as upward.
• Prepare the oven for hearth baking as described on pages 91-94, making sure to have a steam pan in place. Preheat the oven to 500°F. Remove the pan from the bag or lift off the plastic, and let the dough sit exposed for 5 minutes, then score it.
• If you are baking on a stone, slide the parchment and dough onto the back of a sheet pan or onto a peel and then transfer it to the stone (or bake the bread directly in the sheet pan on which it was rising). Pour 1 cup hot water into the steam pan and close the door. After 30 seconds, mist the oven walls with water and close the door. Repeat twice more at 30-second intervals. After the final spray, lower the oven setting to 425°F and bake for 10 minutes. Rotate the loaves 180 degrees, if necessary, for even baking and continue baking for another 10 to 15 minutes, or until done. The internal temperature should register approximately 200°F and the crust should be hard and somewhat coarse (it will soften as the bread cools).
• Transfer the breads to a rack and let them cool for at least 1 hour before slicing or serving.
• Lean, standard dough; indirect method; wild yeast
• Day 1: 4 to 5 hours firm rye starter and soaker
• Day 2: 1 hour to de-chill starter; 6 minutes mixing; 6 hours fermentation, shaping, and proofing; 25 to 30 minutes baking
• The bread is best when made with a variety of grinds, from fine white rye to coarse pumpernickel or even rye chops (cracked rye kernels). This version uses a blend and also utilizes the soaker method to condition the grain and develop enzyme activity.
• If you make rye bread regularly, you can keep a rye barm on hand in addition to your regular barm. Otherwise, you can use your regular barm starter and turn it into a rye starter, but it will contain a proportion of wheat. To make a pure rye-only starter, consult the Commentary on page 229.
• Allow 3 days to make this bread (or start early on the second day to bake it around dinnertime). Because it is low in gluten, the bread will have a fairly tight crumb, not large and irregular as with standard hearth breads. The dough is slightly softer than French bread, but not as wet as ciabatta and other rustic doughs. This added hydration provides some physical leavening (steam) in support of the biological (wild-yeast) leavening provided by the starter. The result is a relatively dense loaf with a long shelf life.
• This same formula also can be used for making spelt bread, another wheat relative that is lower in gluten (mainly it is lower in gliaden, which is the offensive half of gluten to those with sensitivities). Just substitute spelt for rye and follow the same directions.
• As always with rye breads, the use of caraway, anise, or other seeds is optional. This bread is delicious with or without them.
• 100% Sourdough Rye Bread %
• (FIRM RYE STARTER)
• Barm: 77.8%
• White rye flour: 100%
• Water (approx.): 44.4%
• Total: 222.2%
• (SOAKER)
• Coarse rye flour: 100%
• Water: 200%
• Total: 300%
• (FINAL DOUGH)
• White rye flour: 100%
• Firm rye starter: 74.1%
• Soaker: 44.4%
• Salt: 2.8%
• Caraway seeds: 3.7%
• Water (approx.): 51.9%
• Total 276.9

RYE SOURDOUGH BREAD

Steps:

• Day 1: To begin your starter, mix 50g of the flour with 50g tepid water in a jar or, better still, a plastic container. Make sure all the flour is incorporated and leave, covered with a tea towel, at room temperature for 24 hrs.
• Days 2, 3, 4 & 5 : Mix 25g flour with 25g tepid water and stir into yesterday's mixture. Make sure all the flour is incorporated and leave, covered with a tea towel, at room temperature for 24 hrs.
• Day 6: The mix should be really bubbly and giving off a strong smell of alcohol. A teaspoonful of the starter should float in warm water if ready. If not, continue adding 25g flour and 25g tepid water into the mixture daily until it becomes active.If your jar is becoming full, spoon half the mix out of the jar and continue. You now have rye starter, which is a malty flavoured base to sourdough bread. Keep it in the fridge (it will stay dormant) and 12 hrs before you want to use it, spoon half of it off and feed it with 100g flour and 100g water. Leave, covered, at room temperature.
• Tip 100g of the starter into a bowl and add 400g of tepid water. Whisk or rub the two together with your hands, don't worry if there are a few lumps. Add the flour and bring together (with a spatula or your hand) into a thick, sticky dough, making sure all the flour is mixed in, including any dry bits on the sides of the bowl. Cover with a damp tea towel and leave at room temperature for 2 hrs.
• Work the salt into the dough then leave, covered, for another 2 hrs.
• Heavily butter a 900g loaf tin. Dust the work surface with more rye flour, then scrape all the dough out. Mould the dough into a block roughly the same size as the tin and sit it in the tin. Press the dough down so it fills it completely and scatter the top generously with more flour. Leave the loaf out, uncovered, for 2 hrs until it's risen by about a quarter and gone craggy on the top, or leave it in the fridge, uncovered, overnight. This will give it an even deeper flavour.
• Heat the oven to 230/210C fan/gas 8 with a shelf in the middle of the oven and a shelf below with a roasting tray on it. Put the loaf on the middle tray and carefully pour a small glass of water into the roasting tray. Cook for 50-55 mins until hollow sounding when tapped. (The middle of the loaf will read 98C on a digital thermometer when ready.) Remove the tin and leave to cool on a wire rack for at least 4 hrs. Will keep for 3-4 days in an airtight container.