Best To Carve A Rib Roast Recipes

STANDING RIB ROAST OF BEEF

Steps:

• Preheat the oven to 425 degrees.
• Brush the meat with the olive oil. Combine all of the seasonings in a small bowl. Rub the seasoning paste uniformly over the meat. Place the meat, bone side down, in a roasting pan and roast for 20 minutes.
• At the end of 20 minutes, reduce the oven temperature to 350 degrees and continue cooking for 1 1/2 to 2 hours for medium rare or until a thermometer inserted near the center of the roast reads 130 degrees. While the beef is cooking, periodically, CAREFULLY pour off the fat that has accumulated in the roasting pan into a heat proof container.
• Remove the roast from the oven and allow to stand for 20 minutes before carving.
• After the roast has rested for 20 minutes, transfer it to a large cutting board, being careful not to burn yourself. Lay the roast bonesidedown on the cutting board. Insert a sharp knife between the meat and the rib bones, separating the meat from the ribs in one large piece to slice the beef into boneless slices or simply carve into rib portions, each with a bone attached . Carve the boneless meat into 1/2-inch thick slices.

EASY STANDING RIB ROAST

Steps:

• Preheat oven to 475 degrees F (245 degrees C).
• Brush rib roast lightly with olive oil. Rub sea salt, black pepper, and garlic into the roast. Place fatty-side up on a rack set inside a shallow pan.
• Roast in the preheated oven until browned, about 30 minutes. Reduce oven temperature to 325 degrees F (165 degrees C) and tent pan with aluminum foil. Continue cooking until an instant-read thermometer inserted into the center of the rib roast registers 140 degrees (60 degrees C), about 1 hour.
• Let rib roast stand for 10 to 20 minutes before carving.

PERFECT RIB ROAST

Steps:

• Adjust oven rack to low position and preheat oven to 200 degrees F. Heat a large roasting pan over 2 burners set at medium-high heat. Place roast in hot pan and sear on all sides until nicely browned and about 1/2 cup of fat has rendered, 6 to 8 minutes.
• Remove roast from pan. Set a wire rack in pan; set roast on rack. Generously season meat with salt and pepper.
• Place roast in oven and roast until a meat thermometer registers 130 degrees for medium-rare, about 3 1/2 hours. If roast is done sooner than you expect, simply turn oven as low as possible (preferably 150 to 170 degrees F) and let stand until ready to serve.
• Transfer roast to a cutting board, with rib bones perpendicular to board. Using a carving fork to hold roast in place, cut along rib bones to sever meat from bones. Set roast cut side down and carve meat across grain into 3/4 to 1-inch-thick slices. Serve immediately.

TO CARVE A RIB ROAST

Steps:

• For all its grandeur, a standing rib roast is actually much simpler to carve than a turkey. Just make sure that you ask the butcher to remove the chine bone, which lies along the bottom of the cut, so that you can free the ribs easily. And before you attempt either of the following methods, freshly sharpen your carving knife! Otherwise, high drama (or farce, depending on your perspective) is likely to ensue as the roast skids off the carving board.
• The most straightforward method is to stand the roast on its base, ribs pointing up and toward you, and anchor it with a carving fork. Cut between each rib down to the board, cutting around any pieces of chine bone left by the butcher.
• The English method is a little more elegant. Cut a thin slice off one end of the roast to make a flat surface and set the roast on that end. Sticking your fork between the ribs, slice horizontally across the top, cutting each slice free of the bone. A distinct advantage to carving a roast in this manner is that you can make the slices as thin as you want. Many people prefer two or three thin slices to a slab of meat.
• Whichever carving method you choose, give yourself room to maneuver by transferring cut slices to a serving platter as you go.

STANDING RIB ROAST

Steps:

• Preheat oven to 325°. In a small bowl, mix the first 5 ingredients. Place roast in a roasting pan, fat side up; rub with seasoning mixture., Roast 2-1/4 to 2-3/4 hours or until meat reaches desired doneness (for medium-rare, a thermometer should read 135°; medium, 140°; medium-well, 145°). Remove roast from oven; tent with foil. Let stand 15 minutes before carving., Meanwhile, pour drippings and loosened browned bits from roasting pan into a small saucepan. Skim fat. Add beef stock to drippings; bring to a boil. Serve with roast.