Best Texas Bbq Ribs Recipes

TEXAS BBQ RIBS

Steps:

• Prepare barbeque smoker with hickory or pecan wood.
• If you use briquets and woodchips, soak the chips in water.
• Rub ribs with dry rub and let set for one hour before starting to smoke.
• Smoke ribs slowly over indirect heat, 250 to 275 degrees for 2 1/2 hours.
• Wrap ribs in foil, cover meat generously with brown sugar and honey.
• Cook meat till rib bone twists and pulls freely out, about 2 1/2 to 3 more hours.

TEXAS BBQ BEEF RIBS

Steps:

• Pour wood chips into the hopper of a pellet grill according to manufacturer's instructions. Set temperature to 275 degrees F (135 degrees C).
• Trim ribs with a sharp knife to remove as much fat and silver skin from the top of the ribs as possible. Leave the membrane on the bottom of each rack as this will help hold them together as they cook.
• Place steak seasoning in a coffee grinder or food chopper. Grind to a medium coarseness to reduce the size of the salt crystals. Transfer to a shaker bottle. Add chili powder and garlic powder and shake until evenly combined.
• Rub 1/2 of the Worcestershire sauce on the bottom of the ribs as a binder, then sprinkle on a medium to heavy coat of the rub mixture. Flip ribs and repeat on the meaty side. Spritz a light coat of apple juice over top to help it "sweat."
• Immediately place ribs on the preheated pellet grill with the thicker side of the ribs towards the main heat source (toward the back, opposite the lid).
• Smoke ribs, spritzing them with a light coat of apple juice every 30 minutes to keep moist, until the internal meat temperature reaches 198 to 203 degrees F (92 to 95 degrees C), 4 to 6 hours. If it is taking longer don't be afraid to raise the heat to 325 degrees F (165 degrees C) but just watch the internal temperature a little closer, as the window of being done is smaller due to the higher cooking temperature. The temperature probe should slide into the meat like a brisket or like butter when they are ready.
• Remove ribs from the grill and place on a large cutting board. Slice into individual ribs to serve, or remove the meat and place on a tray to serve.

TEXAS BBQ RIBS

Steps:

• Using a large pot, cut ribs if you wish , or place ribs in boiling pot of salted water, until meat is no longer pink. Remove ribs and let sit to cool while you prepare the other ingredients in a large bowl. Mix all ingredients for sauce together, and place ribs into sauce to coat generously. At this point, you can cut the ribs into sections small enough to place in a large Ziploc bag and add sauce, which makes it easier to store in the fridge until ready to cook over BBQ. If not,place remaining sauce in a dish, place ribs on a platter, and take to your BBQ to grill on med-high heat. Baste often with sauce ( this is fine as ribs have already been cooked once and will not cause contamination of sauce ). Ribs take about 15 minutes or cook to your liking basting often. These ribs can also be made on a firepit, just place ribs in aluminum foil, and place in a cast iron frypan or over a firepit grate.